How should you remove scale from the shower head?

The shower head will produce scale after being used for a long time. It needs to be cleaned up in time to ensure normal use. Now let's take a look at how to remove scale in the shower head.

1. Waterproof is carried out first. If there are holes on the shower head that do not produce water, the holes are blocked by scale. Then, insert a fine needle into the hole that does not produce water, and open up the inner scale until all the holes are opened and stop.

2, Prepare a deep container, pour white vinegar into the container, and then the nozzle into the white vinegar. Note that you need to add enough white vinegar to cover the entire head of the nozzle. Then, wait about ten minutes to clean up the scale of the sprinkler head.

3. You can also clean the sprinkler head by removing rust lubricant. You should know that lubricant for metal permeability and affinity, is relatively strong, the rust layer can be better off from the metal, and in the rust position can form a protective film, to avoid the nozzle rust again. And the effect of removing scale is also good.

4, you can also use toothpaste to clean the work, then turn down the shower head, and then apply toothpaste in the position of scale, brush for a few minutes, and then rinse with water.