Shower head maintenance tips

1. Invite experienced professionals to carry out construction and installation. When installing, the shower should try not to hit hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating. Pay special attention to the installation after removing the debris in the pipeline, otherwise it will cause the shower to be blocked by the pipeline debris, which will affect the use.
2. When the water pressure is not less than 0.02mPa (ie 0.2kgf/cubic centimeter), after a period of use, if the water output is found to decrease, or even the water heater is turned off, it can be placed at the water outlet of the shower Gently unscrew the screen cover to remove impurities, and it will generally recover. But remember not to forcibly disassemble the shower head. Due to the complicated internal structure of the shower head, unprofessional forcible disassembly will cause the shower head to be unable to restore the original.
3. Don't use excessive force when turning on or off the shower faucet and adjusting the spraying mode of the shower, just turn it gently. Even the traditional faucet does not require much effort. Pay special attention not to use the faucet handle and shower bracket as a handrail to support or use.

4. The metal hose of the shower head of the bathtub should be kept in a natural stretched state, and do not coil it on the faucet when not in use. At the same time, be careful not to form a dead angle at the joint between the hose and the faucet, so as not to break or damage the hose.